|
| CAT5/5e/6 Cable Tester | Network/Cable Tester | Network Tone Probe |
| CAT5/5e/6 Cable Tester |
| Check CAT5/5e/6 cable for continuity, crossed pairs and pinouts. |
TESTER-CABLE-CAT5 $24.99 |
| Features & Applications |
| The Cable Tester for CAT5/5e/6 and coaxial cable tests for cable continuity and crossed pairs. One person can check both ends of installed wiring with remote and local units.
|
- Tester for CAT5/5e/6 and coaxial cable.
- Power on indicator.
- Visible LEDs for pins 1 though 8.
| - Visible LEDs for ground and BNC status.
- Check pinouts, continuity and crossed pairs.
|
| Specifications |
Connectors
- Local unit:
- One RJ45 connector for testing RJ45/RJ12/RJ11 cable
- One BNC connector for testing coaxial cable
- Remote unit:
- One RJ45 connector for testing RJ45/RJ12/RJ11 cable
- One BNC connector for testing coaxial cable
|
Dimensions
- WxDxH (in):
- Local unit: 4.5x2.5x1.2
- Remote unit: 3.8x1.4x1.2
Power
- Uses one 9V battery
(not included)
Package Includes:
- CAT5/5e/6 Cable Tester — local and remote unit
- User manual
|
| Network/Cable Tester |
| Inspect cables, test shield integrity, and test network function and speed |
TESTER-CABLE-NTWK
$80.00 |
| Features & Applications |
| The Network/Cable Tester combines the capabilities of a network tester, pin by pin cable tester, and tone generator all in one device. It tests network and coaxial cables, generates a tone compatible with any tone probe, and tests the status and speed of the network.
|
- LED indicators for checking cable pins backwards and forwards.
- Automatic, network test, and manual/step test modes.
- Test network speed (10/100/1000Mbps).
- Flash network hub/NIC port.
- Check cables with a loop-back test.
- Test coaxial cable with included adapters.
|
- Detect inactive devices and their speed.
- Test continuous cable shield.
- Detect AC or DC voltage on live lines.
- Generate tone on any pin of cable.
- Compatible with VPI's PROBE-NTWK network tone probe.
|
| Specifications |
Connectors
- Local unit: two female RJ45 connectors for cable testing
- Remote unit: two female RJ45 connectors
- One used for voltage testing
- One used for cable testing
Dimensions
- WxDxH (in):
- Local unit: 4.5x2.6x1.0
- Remote unit: 4.6x1.2x1.0
Power
- Local unit powered by 9V battery(not included)
- Remote unit powered by main unit through test cable
|
Package Includes:
- Network/Cable Tester — local and remote unit
- User manual
- Two RJ45 to F adapters
- Six-inch RJ45 male to male pass-through cable to connect to a switch or hub
- Carrying case
|
| Network Tone Probe |
| Trace data/phone wiring and test voltage on lines |
PROBE-NTWK
$50.00 |
| Features & Applications |
The Network Tone Probe allows you to trace cables and find cable ends, and also doubles as a telecom polarity and voltage tester. The probe requires a tone generator such as VPI's TESTER-CABLE-NTWK Network/Cable Tester in order to function.
As a tone probe, use the volume control and visible tone LED indicator to make tracing cables easy even in noisy environments.
As a voltage tester, it has LED indicators that signal the presence of voltage and the polarity of the line.
|
- Compatible with most available tone generators, including VPI's TESTER-CABLE-NTWK Network/Cable Tester.
- Detect line voltage as AC or DC.
- Low battery indicator.
|
- 2.5mm earphone connector for isolation of tone in a noisy environment.
- Lanyard cable for easy access to probe.
- Use test pins to detect voltage via alligator clips.
|
| Specifications |
Connectors
- One female RJ45 connector for testing voltage
- One female 2.5mm connector for earphones
Dimensions
|
Power
- Uses one 9V battery(not included)
Package Includes:
- Network Tone Probe
- Replacement tip
- User manual
- Lanyard cable
|
|
